TESTING EQUIPMENT FOR : soil,concrete,aggregate,asphalt cement,mining&general machine, alat uji Tanah , alat uji Beton , alat uji Batuan , alat uji cemen , Alat Uji Laboratorium Teknik Sipil , Alat Uji Laboratorium Tanah , Alat Uji Laboratorium Batuan , Alat Uji Laboratorium Aspal , Alat Uji Laboratorium Pertambangan dan Batu Bara , alat Pertambangan Mining, peralatan teknik sipil , peralatan Laboratorium , peralatan Konstruksi Jalan .
 |
Specific Gravity of Semi-Solid Bituminous Materials |
|
| ASTM D-70 | AASHTO T-228 | ||
| For determining the specific gravity of semi-solid bituminous materials, asphalt cement, and soft tar pitches by use of a picnometer | |||
| RI-101 | Picnometer | Hubbart type, 24 ml capacity | 1 Pc |
|---|---|---|---|
| RI-102 | Picnometer | Hubbart type, 25 ml capacity | 1 Pc |
| RG-642 | Thermometer | ASTM 63 C, 8-32oC | 1 Pc |
| RG-191 | Hot Plate |
|---|---|
| RG-363 | Mixing Bowl |
| RG-473 | Funnel |
 |
Water Content In Petroleum Products |
| Dimension (l x w x h) | : 25 x 25 x 60 cm |
| Gross Weight | : 10 kg |
| ASTM D-95 | AASHTO T-55 | ||
| For determining water in crude petroleum, tars and products derived from these materials | |||
| RI-121 | Flask | Heat resistance glass, 500 ml capacity | 1 Pc |
|---|---|---|---|
| RI-122 | Water Trap | Glass for receiving distilated water | 1 Pc |
| RI-123 | Condenser | Glass, jacketed | 1 Pc |
| RI-124 | Support Assembly | For holding apparatus assembly | 1 Set |
| RI-125 | Flask Support | Variable height adjustment | 1 Pc |
| RG-230 | Bunsen Burner | Heat resource | 1 Pc |
| RG-237 | Asbestos Wire Gauze | 15 x 15 cm | 1 Pc |
| Also required, but not part of this set :RG-152 Triple Beam BalanceRG-203 Cooling System RG-222 Butane Field Heater RG-473 Glass Funnel RG-748 Leather Gloves |
 |
Softening Point Test Set |
| Dimension (l x w x h) | : 90 x 30 x 30 cm |
| Gross Weight | : 10 kg |
| ASTM D-36 | AASHTO T-53 | ||
| For determining softening point of asphalt and tar using the ring and ball method | |||
| RI-211 | Shouldered Ring Assembly | Machined brass, height adjusment | 1 Set |
|---|---|---|---|
| RI-212 | Standard Ball | Steel ball, 9.52 mm dia. | 2 Pcs |
| RI-213 | Flash Support | Mesh wire gauze variable height adjustment | 1 Set |
| RI-214 | Support Assembly | Metal, provided with thermometer holder | 1 Set |
| RG-230 | Bunsen Burner | Heat resources | 1 Pc |
| RG-237 | Asbestos Wire Gauze | 15 x 15 cm | 1 Pc |
| RG-424 | Beaker Glass | 1000 ml capacity | 1 Pc |
| RG-646.1 | Thermometer | ASTM 15 C, 2 to 80oC | 1 Pc |
| Also required, but not part of this set :RC-473 LadleRG-222 Butane Field Heater RG-363 Mixing Bowl RG-700 Stop Watch RG-820 Spatula |
 |
Saybolt Viscosimeter |
| Dimension (l x w x h) | : 70 x 70 x 70 cm |
| Gross Weight | : 25 kg |
| ASTM D-88 | AASHTO T-72 | ||
| For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C. | |||
| RI-151 | Viscosimeter | Stainless steel bath, motor stirer, 220 V-AC, Thermostat control panel, 2 tubes capacity | 1 Set |
|---|---|---|---|
| RI-154 | Viscosimeter Tube | Brass, seamless, provided with tips and tip wrench | 2 Pcs |
| RI-155 | Tube Wrench | T-wrench | 1 Pc |
| RI-156 | Pipet | Brass with rubber bulb | 1 Pc |
| RI-157 | Thermometer Support | Alumunium plate | 2 Pcs |
| RI-158 | Flask | 60 ml capacity | 2 Pcs |
| RI-159 | Funnel | Brass, 60oangle, complete with mesh 100 / mesh 200 | 1 Pc |
| RG-644.1 | Thermometer | ASTM 17 C, 19 to 27oC | 2 Pcs |
| RG-644.2 | Thermometer | ASTM 18 C, 34 to 42oC | 2 Pc |
| RG-644.3 | Thermometer | ASTM 19 C, 49 to 57oC | 2 Pcs |
| RG-644.4 | Thermometer | ASTM 20 C, 57 to 65oC | 2 Pc |
| RG-644.5 | Thermometer | ASTM 21 C, 79 to 87oC | 2 Pcs |
| RG-644.6 | Thermometer | ASTM 22 C, 95 to 103oC | 2 Pc |
| RG-700 | Stop Watch |
|---|
 |
Mot Straight Edge |
| Dimension (l x w x h) | : 350 x 30 x 30 cm |
| Gross Weight | : 20 kg |
| For measuring the irregulation of road surface both asphalt and concrete pavement | |||
| RI-471 | Mot Straight | Alumunium profile, 3 meter length, with handle | 1 Pc |
|---|---|---|---|
| RI-472 | Metric Wedges | Variable measurement from 2.5 – 7.5 cm, machine cast alumunium | 1 Pc |
 |
Reflux Extractor Test Set |
| Dimension (l x w x h) | : 90 x 50 x 50 cm |
| Gross Weight | : 15 kg |
| ASTM D-2172 | AASHTO T-164 | ||
| For determining bitument content in hot mixed paving mixture and pavement sample | |||
| RI-311 | Reflux Extractor | ||
|---|---|---|---|
| |||
| RI-311.1 | Glass Jar | Pyrex 6″ i.d approx. | 1 Pc |
| RI-311.2 | Funnel | Two wire mesh screen cone | 1 Pc |
| RI-311.3 | Condensor | Brass/copper | 1 Pc |
| RI-312 | Hot Plate | 220 V-AC, 1000/1500 Watt | 1 Set |
| RI-313 | Filter Paper | Low ash filter paper | 1 Box |
| RG-216 | Asbestos Wire Gauze | 15 cm x 15 cm | 1 Pc |
 |
Loss on Heating/Thin-Film |
| Dimension (l x w x h) | : 100 x 100 x 100 cm |
| Gross Weight | : 45 kg |
| ASTM D-6/D-1754 | AASHTO T-47/T-179 | ||
| For determining the loss in mass (exclusive of water) of asphaltic compounds after heating | |||
| RI-221 | Resolving Shelf Oven | Variable temperature oven, cas alumunium rotating shelf, 5-6 RPM, external electromotor drive, 220 V-AC, 1400 Watt. | 1 Set |
|---|---|---|---|
| RG-390 | Thin Box | 55 mm i.d. approx. alumunium sheet, seamless | 12 Pcs |
| RG-643 | Thermometer | ASTM 13 C, 155 to 170oC | 1 Pc |
| Also required, but not part of this set :RC-473 LadleRG-150 Cent O-Gram Balance RG-222 Butane Field Heater RG-363 Mixing Bowl RG-748 Leather Gloves |
 |
Marshall Test Set |
| Dimension (l x w x h) | : 67 x 50 x 100 cm |
| Gross Weight | : 200 kg |
| ASTM D-1559 | AASHTO T-245 | ||
| For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus. | |||
| RI-321 | Compression Machine | Steel frame, electric, 220 V-AC, 1/2 HP, 1 Phase, speed:2″ per minute | 1 Set |
|---|---|---|---|
| RI-322 | Compaction Mold | Machined steel, galvanized, 4″ dia., 3″ height, with collar and base plate | 1 Set |
| RI-323 | Stability Mold | Cast alumunium, split type 4″ i.d., 4″ wide | 1 Set |
| RI-324 | Compaction Hammer | Machined steel, galvanized, 10 lbs, hammer weight, 18″ drop height | 1 Set |
| RI-326 | Compaction Pedestal | Wooden base with steel platen | 1 Pc |
| RI-327 | Compaction Mold Holder | Machined steel, quick clamping system | 1 Set |
| RI-328 | Extruder | Steel frame, hydraulic system | 1 Set |
| RI-329 | Flow Meter | Cast alumunium, clamping bolt, with dial indicator 30 x 0.01 mm | 1 Set |
| RG-200 | Water Bath | Stainless steel, water heater 220 V-AC, thermostat 30-85oC | 1 Set |
| RG-101.6 | Proving Ring | 6000 lbs capacity | 1 Set |
 |
Flash and Fire Point by Clevelend Open Cup |
| Dimension (l x w x h) | : 100 x 50 x 50 cm |
| Gross Weight | : 20 kg |
| ASTM D-92 | AASHTO T-48 | ||
| For determining flash and fire point by cleveland open cup for petroleum product and other liquids, expect fuel oils and materials having an open flash point below 79 C (173 F) as determined by cleveland open cup tester | |||
| RI-201 | Flash Cup | Brass, insulation handle | 1 Pc |
|---|---|---|---|
| RI-202A | Cleveland Electric | Electric, 220 V-AC, heating speed control | 1 Set |
| RG-648 | Thermometer | ASTM 11 C, 6 to 400oC | 1 Pc |
| RG-363 | Mixing Bowl |
|---|
 |
Ductility of Bituminous Materials |
| Dimension (l x w x h) | : 244 x 80 x 80 cm |
| Gross Weight | : 150 kg |
| ASTM D-113 | AASHTO T-51 | ||
| For determining ductility of formed asphalt/cement or semi solid bitument by measuring distance of elongation before breaking point when two end of briquet are pulled a part at a apecific speed and temperature/ | |||
| RI-251 | Ductility Mold | Form sample shape and hold end during test, made of brass, provided with base | 1 Set |
|---|---|---|---|
| RI-253 | Ductility Machine | Electric 220 V-AC, stainless steel bath, provided with temperature control. Pulling speed: 5 cm/min Travel range: 150 cm | 1 Set |
| Also required, but not part of this set :RI-254 GlyserinRI-255 Talk RG-222 Butane Field Heater RG-363 Mixing Bowl RG-600 Thermometer RG-820 Spatula |